Slabhraí Iompair Sraith SS M, agus le Ceangaltáin
Slabhra iompair (sraith M)
| Uimhir Slabhra GL | Páirc | Trastomhas an tSorcóra | Trastomhas an tor | Leithead Idir Plátaí Istigh | Toise bioráin | Toise an Phláta | Neart Teanntachta Deiridh | ||||
| P | d1 | d4 | d5 | d3 | b1 | d2 | L | h2 | T | Q | |
| nóim | uasmhéid | uasmhéid | uasmhéid | nóim | uasmhéid | uasmhéid | uasmhéid | uasmhéid | nóim | ||
| mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | KN | |
| SSM20 | *40.0 50 63 80 100 125 160 | 25.00 | 12.50 | 32.00 | 9.00 | 16.00 | 6.00 | 35.00 | 19.00 | 2.50 | 14.00 |
| SSM28 | *50.0 63 80 100 125 160 200 | 30.00 | 15.00 | 36.00 | 10.00 | 18.00 | 7.00 | 40.00 | 21.00 | 3.00 | 19.60 |
| SSM40 | 63 80 100 125 160 200 250 | 36.00 | 18.00 | 42.00 | 12.50 | 20.00 | 8.50 | 45.00 | 26.00 | 3.50 | 28.00 |
| SSM56 | *63.0 80 100 125 160 200 250 | 42.00 | 21.00 | 50.00 | 15.00 | 24.00 | 10.00 | 52.00 | 31.00 | 4.00 | 39.20 |
| SSM80 | 80 100 125 160 200 250 315 | 50.00 | 25.00 | 60.00 | 18.00 | 28.00 | 12.00 | 62.00 | 36.00 | 5.00 | 52.00 |
| SSM112 | *80.0 100 125 160 200 250 315 400 | 60.00 | 30.00 | 70.00 | 21.00 | 32.00 | 15.00 | 73.00 | 41.00 | 6.00 | 72.80 |
| SSM160 | *100.0 125 160 200 250 315 400 500 | 70.00 | 36.00 | 85.00 | 25.00 | 37.00 | 18.00 | 85.00 | 51.00 | 7.00 | 104.00 |
| SSM224 | *125.0 160 200 250 315 400 500 630 | 85.00 | 42.00 | 100.00 | 30.00 | 43.00 | 21.00 | 98.00 | 62.00 | 8.00 | 134.40 |
| SSM315 | *160.0 200 250 315 400 500 630 | 100.00 | 50.00 120.00 | 36.00 | 48.00 | 25.00 112.00 72.00 10.00 | 189.00 | ||||
| SSM450 | 200 250 315 400 500 630 800 | 120.00 | 60.00 | 140.00 | 42.00 | 56.00 | 30.00 | 135.00 | 82.00 | 12.00 | 270.00 |
Slabhra iompair le ceangaltán (sraith M)
| GL Uimhir Slabhra | P | L | G | d4 | F | W | h4 |
| mm | mm | mm | mm | mm | mm | mm | |
| SSM20 | 40.0 | - | 14.0 | ||||
| 50.0 | - | 14.0 | |||||
| 63.0 | 20.0 | 35.0 | 6.6 | 27.0 | 40.0 | 16.0 | |
| 80.0 | 35.0 | 50.0 | |||||
| SSM28 | 50.0 | - | 20.0 | ||||
| 63.0 | - | 20.0 | 9.0 | 32.0 | 47.0 | 20.0 | |
| 80.0 | 25.0 | 45.0 | |||||
| 100.0 | 40.0 | 60.0 | |||||
| SSM40 | 63.0 | - | 31.0 | ||||
| 80.0 | 20.0 | 45.0 | |||||
| 100.0 | 40.0 | 60.0 | 9.0 | 35.0 | 50.0 | 25.0 | |
| 125.0 | 65.0 | 85.0 | |||||
| SSM56 | 63.0 | - | 22.0 | ||||
| 80.0 | - | 30.0 | |||||
| 100.0 | 25.0 | 50.0 | 11.0 | 44.0 | 61.0 | 30.0 | |
| 125.0 | 50.0 | 75.0 | |||||
| 160.0 | 85.0 | 110.0 | |||||
| SSM80 | 80.0 | - | 30.0 | ||||
| 100.0 | 25.0 | 50.0 | |||||
| 125.0 | 50.0 | 75.0 | 11.0 | 48.0 | 65.0 | 35.0 | |
| 160.0 | 85.0 | 110.0 | |||||
| 200.0 | 125.0 | 150.0 |
Ábhar: cruach dhosmálta sraith 300,400,600
Ábhar sorcóra ar fáil: POM, PA6
| Uimhir Slabhra GL | P | L | G | d4 | F | W | h4 |
| mm | mm | mm | mm | mm | mm | mm | |
| SSM112 | 80.0 | 一 | 28.0 | ||||
| 100.0 | 一 | 40.0 | |||||
| 125.0 | 35.0 | 65.0 | 14.0 | 55.0 | 80.0 | 40.0 | |
| 160.0 | 65.0 | 95.0 | |||||
| 200.0 | 100.0 | 130.0 | |||||
| SSM160 | 100.0 | - | 30.0 | ||||
| 125.0 | 25.0 | 50.0 | |||||
| 160.0 | 50.0 | 80.0 | 14.0 | 62.0 | 85.0 | 45.0 | |
| 200.0 | 85.0 | 115.0 | |||||
| 250.0 | 145.0 | 175.0 | |||||
| SSM224 | 125.0 | 一 | 35.0 | ||||
| 160.0 | 一 | 60.0 | |||||
| 200.0 | 65.0 | 100.0 | 18.0 | 70.0 | 100.0 | 55.0 | |
| 250.0 | 125.0 | 160.0 | |||||
| 315.0 | 190.0 | 230.0 | |||||
| SSM315
| 160.0 | 一 | 35.0 | ||||
| 200.0 | 50.0 | 85.0 | |||||
| 250.0 | 100.0 | 140.0 | 18.0 | 80.0 | 115.0 | 65.0 | |
| 315.0 | 155.0 | 190.0 | |||||
| 400 | 155.0 | 205.0 |
Tá an tsraith M anois ar an gcaighdeán Eorpach is mó a úsáidtear. Tá an slabhra ISO seo ar fáil ó SSM20 go SSM450. Dá bhrí sin, freastalóidh an tsraith ar an gcuid is mó de na riachtanais láimhseála meicniúla a bhíonn ann. Cé go bhfuil an slabhra seo inchomparáide le DIN 8165, níl sé inmhalartaithe le caighdeáin slabhra sorcóir beachtais eile. Ar fáil le sorcóirí caighdeánacha, móra nó flanseáilte, úsáidtear go coitianta é ina fhoirm tor freisin go háirithe in iompar adhmaid. Tá ábhar cruach carbóin ar fáil.